In California, how your solar is credited depends on your utility and on when your system applied to connect to the grid. California also has consumer protection rules: before you sign, a solar company must give you a disclosure document, and PG&E, SCE and SDG&E customers also sign a Solar Consumer Protection Guide. Here's what to know, and which utility guide to read.
How does solar billing work in California?
Solar billing in California depends on your utility:
PG&E, SCE and SDG&E: systems that applied to connect on or after April 15, 2023 are on net billing, which these utilities call the Solar Billing Plan. Many people call it NEM 3.0. Older systems are on Net Energy Metering (NEM) 1.0 or NEM 2.0.
LADWP: the Los Angeles Department of Water and Power has its own net metering program.
To learn how each plan credits the power you send to the grid, see What are net metering and net billing?
Which California utility guide should I read?
Read the guide for the utility on your electric bill:
Why does the time I use power matter on the Solar Billing Plan?
The time you use power matters on the Solar Billing Plan because the credit for power you send to the grid is usually lower than the price you pay for power you buy. So using your solar power at home, or storing it in a battery for the evening, usually helps more than sending it to the grid. For tips, see How can I lower my bill with net billing (NEM 3.0)?
What documents should I get before I sign?
Before you sign a solar contract in California, you should get these documents:
Solar Energy System Disclosure Document: this goes on the front page of every solar contract. It shows the total cost and payments, including financing, how to make a complaint, and your right to cancel. A supporting form shows the bill savings estimate and the assumptions behind it.
California Solar Consumer Protection Guide: if PG&E, SCE or SDG&E is your utility, the solar company must give you time to read this guide from the California Public Utilities Commission (CPUC), and collect your initials and signature on it.
You also have the right to your contract and these documents in the language the salesperson used with you. Ask how your bill savings estimate was calculated. An estimate isn't a promise.
How do I check a solar company's license in California?
To check a solar company's license, use the Contractors State License Board (CSLB) license check page. A solar contractor's license should be active and in one of these classes: C-46 (Solar), C-10 (Electrical) or B (General Building). You can also ask a salesperson for their home improvement salesperson (HIS) registration number and check it on the same page.
Why do you ask for my hourly electricity use?
We ask for your hourly electricity use because California rules ask solar companies to base your bill savings estimate on your past 12 months of hourly use, when it's available. See How do I share my hourly energy use (interval data)?
Can I cancel after I sign?
Your agreement explains your right to cancel and how to use it. See Can I cancel my solar order?
Are there solar incentives in California?
Some state, local or utility programs may be available, and they change over time, so check what's current for your address. The federal homeowner solar tax credit isn't available for systems placed in service after December 31, 2025. See Federal solar tax credit: what changed after 2025
