Inverter clipping happens when your solar panels make more direct current (DC) power than your inverter can turn into alternating current (AC) power. The inverter holds its output at its limit, so a little power at the peak of a bright day isn't used. Many systems are designed to clip a little. Clipping on its own doesn't mean something is wrong.
Why is my inverter smaller than my solar panels?
Your inverter may be smaller than your solar panels because panels rarely make their full rated power. Heat, the angle of the sun, clouds and dirt all lower what panels make. A slightly smaller inverter runs closer to its limit for more of the day, so the system can make more power over the year. SolarEdge, for example, lets its home inverters be paired with panels rated up to 155% of the inverter's size.
When does inverter clipping happen?
Inverter clipping happens around midday on clear, bright days, when your panels make the most power. Panels make more power when they're cool, so clipping is more likely on cool, sunny days than on very hot ones.
How can I tell if my system is clipping?
To tell if your system is clipping, look at the power graph for a clear day in your monitoring app. When your system clips, the graph rises in the morning, stays flat at the same level for a while around midday, then falls in the afternoon. That flat top is your inverter's limit. See How do I monitor the performance of my solar system?
Does clipping lower my production much?
Clipping usually lowers your production only a little. SolarEdge explains that the extra power a system makes during the rest of the day, and on cloudy days, outweighs the power clipped at the peak. Your production changes with the seasons, the weather and shade too.
When should I contact Better Earth?
Contact us if your production looks low, not just flat at the top. For example, if your graph flattens well below its usual peak, your production drops suddenly, or your app shows an alert. Start with Solar system not working or monitoring app not updating? To ask us to check your system, see How do I request service for my solar system?
