Skip to main content

How do I reconnect my Enphase gateway to Wi-Fi?

How to reconnect your Enphase gateway to Wi-Fi in the Enphase App after you change your internet, and when to ask us for help.

Your Enphase IQ Gateway, also called the Envoy, sends your system's data to the Enphase App. If you change your internet provider, Wi-Fi name or Wi-Fi password, the gateway loses its connection and your app stops updating. Your panels keep making power. Reconnect the gateway to your new Wi-Fi with the steps below. For any other problem, request service and we troubleshoot it.


​

When should I reconnect my gateway?

Reconnect your gateway when your app shows a Gateway Not Reporting alert, or stopped updating, after you changed your internet provider, Wi-Fi name or Wi-Fi password. If your Wi-Fi didn't change, don't restart, unplug or switch off the gateway yourself. Send us a request with our service request form, and we troubleshoot it for you.


​

Where is my Enphase gateway?

Your Enphase gateway is usually near your main electrical panel or utility meter, for example in a garage, utility room or closet, or outside in a weatherproof box. It's either a small box on its own or inside a larger gray Enphase box called an IQ Combiner.


​

An Enphase IQ Gateway, also called the Envoy. It can be white or black.

An Enphase IQ Gateway, also called the Envoy. It can be white or black.


​

An Enphase IQ Combiner box. The gateway is inside it.

An Enphase IQ Combiner box. The gateway is inside it.


​

You don't need to touch any breaker to reconnect it. If you can't find your gateway, contact us and we'll help.


​

What do I need before I start?

Before you reconnect your gateway, check that:

  • You're at home, near the gateway.

  • Wi-Fi works on your other devices, and you know your Wi-Fi name and password.

  • You have the latest Enphase App and you're signed in as the system owner. If your system is leased or under a power purchase agreement (PPA), sign in with the login you were given as the host.


​

How do I reconnect my Enphase gateway to Wi-Fi?

To reconnect your gateway to Wi-Fi:

  1. Turn on the gateway's AP (access point) mode: briefly press and release the AP mode button on the gateway. Don't hold it. AP mode is on when the light next to the phone icon turns solid green.

  2. In the Enphase App, tap Connect Gateway to the Internet on the Gateway Not Reporting alert, then tap Configure Wi-Fi. If you don't see the alert, go to Menu > Settings > Connectivity, then tap Configure Wi-Fi.

  3. Keep your phone near the gateway. Tap Connect, then tap Join.

  4. Tap Scan Wi-Fi Network and choose your home Wi-Fi network. Enphase suggests a 2.4 GHz network, because it usually reaches farther than 5 GHz. Its name may include 2G, 2.4G or 2.4 GHz.

  5. Enter your Wi-Fi password and tap Join.

  6. Wait for the app to confirm that the gateway is connected.


​

The AP mode button on the IQ Gateway (left) and on the gateway inside an IQ Combiner (right)

The AP mode button on the IQ Gateway (left) and on the gateway inside an IQ Combiner (right)


​

The Connectivity screen in the Enphase App, with Configure Wi-Fi

The Connectivity screen in the Enphase App, with Configure Wi-Fi


​

What if my phone won't connect to the gateway?

If your phone doesn't connect to the gateway in step 3, tap Retry. If it fails again, open your phone's Wi-Fi settings and connect to the gateway's network, whose name starts with ENVOY_. Then go back to the Enphase App and tap Retry. If the app still can't connect, request service.


​

Can I use my router's WPS button instead?

If the app steps don't work and your router has a WPS button, you can try this instead:

  1. Press and hold the WPS button on your router for 2 seconds.

  2. Within 2 minutes, press and hold the AP mode button on the gateway for 5 seconds. A short press turns on AP mode instead. The light next to the phone icon flashes green while the gateway pairs with your router.

  3. Within 2 minutes, check that the light next to the cloud icon turns solid green.


​

If the gateway doesn't connect after 2 tries, request service.


​

How do I know the gateway is connected?

When the gateway is connected to the internet, the light next to the cloud icon turns solid green. It can show red for a while as the gateway reconnects, which is normal. The Gateway Not Reporting alert also goes away.


​

The light next to the cloud icon on an IQ Gateway (left) and on the gateway inside an IQ Combiner (right)

The light next to the cloud icon on an IQ Gateway (left) and on the gateway inside an IQ Combiner (right)


​

How long until my app shows my data again?

After the gateway reconnects, it uploads the data it saved while it was offline, oldest data first. Your app shows a Data Uploading notice until it's done. Enphase says this takes about 1 hour for each day the gateway was offline. For example, 30 days offline takes about 30 hours.


​

What if the gateway's lights are off or red?

If all of the gateway's lights are off, flashing red or solid red, or AP mode won't turn on, don't restart or unplug the gateway, and don't switch off its breaker. Request service with our service request form, and we troubleshoot it for you.


​

What if my gateway uses Ethernet or a cell modem?

Some gateways connect with an Ethernet cable or a cellular modem instead of Wi-Fi. To see which one yours uses, open Menu > Settings > Connectivity in the Enphase App, or see Enphase's Gateway Not Reporting guide. If your gateway still isn't reporting, request service and include a screenshot of the alert in your app.


​

Related articles

Did this answer your question?