Skip to main content

How do I reset or reconnect my Enphase gateway?

How to restart your Enphase IQ Gateway and reconnect it to Wi-Fi when the Enphase App says your system isn't reporting.

Your Enphase IQ Gateway, also called the Envoy, sends your system's data to the Enphase App. If the app says your gateway isn't reporting, or your data stopped updating, restart the gateway. If it still doesn't connect, reconnect it to your Wi-Fi. Restarting often fixes communication problems. Do it only if nothing looks damaged, wet or unsafe.


​

Where is my Enphase gateway?

Your Enphase gateway is usually near your main electrical panel. It's either a small box on its own or inside a larger gray Enphase box called an IQ Combiner.


​

An Enphase IQ Gateway, also called the Envoy. It can be white or black.

An Enphase IQ Gateway, also called the Envoy. It can be white or black.


​

An Enphase IQ Combiner box. The gateway is inside it.

An Enphase IQ Combiner box. The gateway is inside it.


​

If you can't find your gateway, contact us and we'll help.


​

Where is the gateway's circuit breaker?

The gateway's circuit breaker is in one of these places:

  • Gateway on its own: in your main electrical panel or a subpanel. Some gateways plug into a power outlet instead.

  • IQ Combiner: inside the IQ Combiner box. It's usually the middle breaker.

  • Systems with an IQ Battery 3T or 10T: inside the IQ System Controller 2.


​

Turning off the gateway breaker inside an IQ Combiner box

Turning off the gateway breaker inside an IQ Combiner box


​

How do I restart my Enphase gateway?

To restart your Enphase gateway:

  1. Turn off the gateway's circuit breaker, or unplug the gateway from its power outlet. Don't touch any wiring.

  2. Wait 30 seconds.

  3. Turn the breaker back on, or plug the gateway back in.


​

The gateway can take several minutes to restart. If its lights stay off or keep flashing red for more than 10 minutes after a restart, your system needs to be checked: request service. If the breaker trips again, stop and contact us.


​

How do I know if the restart worked?

Check the first light on the gateway, next to the cloud icon. It may show red while the gateway reconnects, and turns green once the gateway is connected to the internet. If that light is off, reconnect the gateway to Wi-Fi (see below).


​

The light next to the cloud icon on an IQ Gateway (left) and on the gateway inside an IQ Combiner (right)

The light next to the cloud icon on an IQ Gateway (left) and on the gateway inside an IQ Combiner (right)


​

After the gateway reconnects, it uploads the data it saved while it was offline. Enphase says this can take several hours, or longer after a long outage. Your app fills in the missing data as it uploads.


​

How do I reconnect my Enphase gateway to Wi-Fi?

Your gateway loses its Wi-Fi connection if you change your internet provider, Wi-Fi name or Wi-Fi password. Before you start, make sure you are at home near the gateway, your internet is working, you have the latest Enphase App, and you are logged in as the system owner.


​

If the app shows a Gateway Not Reporting alert, you can tap Connect Gateway to the Internet and follow the steps. Or reconnect it this way:

  1. In the Enphase App, go to Menu > Settings > Connectivity, then tap Configure Wi-Fi.

  2. Tap Connect, then tap Join. This connects your phone to the gateway.

  3. Tap Scan Wi-Fi Network.

  4. Choose your home Wi-Fi network.

  5. Enter your Wi-Fi password and tap Join.

  6. Wait for the app to confirm that the gateway is connected.


​

The Connectivity screen in the Enphase App, with Configure Wi-Fi

The Connectivity screen in the Enphase App, with Configure Wi-Fi


​

What if my phone won't connect to the gateway?

If your phone won't connect to the gateway in step 2, turn on the gateway's AP (access point) mode. Briefly press and release the AP mode button on the gateway; don't hold it. The second light turns solid green when AP mode is on. Then tap Retry in the app. If you held the button too long, wait 2 minutes and briefly press it again.


​

The AP mode button on the IQ Gateway (left) and on the gateway inside an IQ Combiner (right)

The AP mode button on the IQ Gateway (left) and on the gateway inside an IQ Combiner (right)


​

If the gateway still won't join your Wi-Fi, try these tips from Enphase:

  • Restart your router: turn it off for 30 seconds, then back on.

  • Check that Wi-Fi works on your other devices.

  • Make sure your Wi-Fi name and password are correct.

  • Use a 2.4 GHz Wi-Fi network if your router isn't close to the gateway. The network name may include 2G, 2.4G or 2.4 GHz.


​

What if my gateway uses Ethernet or a cell modem?

Some gateways connect with an Ethernet cable or a cellular modem instead of Wi-Fi. To see which one yours uses, open Menu > Settings > Connectivity in the Enphase App. For Ethernet or cellular connections, follow Enphase's reconnection guide. If Wi-Fi keeps failing, Enphase suggests connecting the gateway straight to your router with an Ethernet cable.


​

If none of this works, request service and include a screenshot of the alert in your app.


​

Related articles

Did this answer your question?