How do I reconnect my SolarEdge inverter to Wi-Fi using the mySolarEdge app?
If you need to reconnect your SolarEdge inverter to Wi-Fi, whether as part of regular troubleshooting or due to a change in internet providers or home network settings, you can do so easily using the mySolarEdge app. Follow the steps below to ensure your system is properly connected to the SolarEdge Monitoring server.
Step-by-Step Guide to Reconnect Wi-Fi
Log in to the mySolarEdge app: - Ensure you have installed and logged into the mySolarEdge mobile app on your device.
Navigate to Inverter Communication Settings: - Open the menu (located in the upper left corner of the app). - Select Inverter Communication and then Configure Wi-Fi.
Connect to the Inverter’s Temporary Wi-Fi: - If prompted, follow the in-app instructions to connect your device to the inverter’s temporary Wi-Fi network. This network will have a name similar to
solaredge_xxxx.Select Your Home Wi-Fi Network: - Choose your home Wi-Fi network from the list of available networks displayed in the app. - Enter your home Wi-Fi password when prompted.
Complete the Configuration: - The app will complete the connection process. Follow any additional on-screen prompts to finalize the setup.
Verifying Connectivity
After completing the above steps, confirm that the connection has been successfully established:
In the mySolarEdge app, navigate to Inverter Communication or Inverter Status.
Check for the status message “S_OK,” which indicates that the inverter is successfully communicating with the SolarEdge Monitoring server.
For models with LED indicators, ensure the blue LED is lit. This confirms an active connection to the monitoring server.
Troubleshooting Tips
If you encounter any issues during the Wi-Fi reconnection process:
Double-check that the home Wi-Fi network credentials (SSID and password) are correct.
Ensure that your smartphone or tablet remains within range of the inverter and the home Wi-Fi router.
Restart your router to eliminate intermittent connectivity issues.
If the blue LED is not lit after completing the process, repeat the steps to reconfigure the Wi-Fi connection.
By following these steps, you can quickly restore your inverter’s connection, ensuring uninterrupted solar system monitoring and performance tracking.