Skip to main content

What does each part of my solar system do?

What each part of your solar system does, from the inverter and combiner box to the disconnect, meters, electrical panels and conduit.

Your solar system has more parts than the panels on your roof. Some turn solar power into power your home can use, some connect your system safely to your home and the grid, and some send data to your monitoring app. This page explains each part and shows photos of some of them. Your site plan shows which parts your system has and where each one goes.


​

How do I know which parts my system has?

Your site plan lists the parts your system has, with a number for each one. New parts are marked "(N)" and parts already at your home, such as your utility meter, are marked "(E)". For where each part goes and why, see Where your equipment goes, and why


​

What does the inverter do?

The inverter turns the direct current (DC) power your panels make into the alternating current (AC) power your home uses. Depending on your system, it's a box on your wall (SolarEdge), a small microinverter under each panel (Enphase), or built into a Tesla Powerwall 3. See What does a solar inverter do?


​

What is a combiner box?

A combiner box is a gray box that connects your solar panels to your home. It usually goes on the wall near your main electrical panel. Enphase systems use an IQ Combiner, and the Enphase gateway that sends your data to the Enphase App is often inside it. Some systems use a larger AC combiner panel instead.


​

An Enphase battery (left) and combiner box (right) on an outside wall

An Enphase battery (left) and combiner box (right) on an outside wall


​

What is the AC disconnect?

The AC disconnect is a shut-off switch that lets the utility or a firefighter safely turn off your solar system. Many utilities require it, and they decide where it goes, usually outside near your meter. Some systems also have a DC disconnect or a battery disconnect, which are shut-off switches for other parts of the system.


​

An AC disconnect on an outside wall

An AC disconnect on an outside wall


​

What is rapid shutdown?

Rapid shutdown is a safety feature that turns off the power in the wiring on your roof in an emergency, to protect firefighters and utility workers. It's built into Enphase microinverters and SolarEdge systems.


​

What do the utility meter and production meter do?

Your utility meter measures the power you buy from the grid and the power your system sends to it. Your utility may install a new meter after your system is approved. Some systems also have a production meter, which measures only the power your solar system makes.


​

What do the backup switch, backup gateway and meter collar do?

A backup switch or backup gateway lets your home switch to battery power in an outage. Your system has one only if it has a backup battery. It goes at or near your utility meter. Some systems use a meter collar instead, a ring that fits behind your utility meter. A meter collar needs your utility's approval.


​

What are the main panel, sub panel and load center?

Your main electrical panel is where your home's power comes in and splits into circuits. Your solar system connects to your home there or at a panel nearby:

  • Main panel upgrade: if your main panel can't safely connect to solar, we replace it. See What if my home needs a main panel upgrade for solar?

  • Sub panel or load center: a smaller electrical panel that adds space for more circuits. Sometimes it's an option instead of a main panel upgrade.

  • Backup loads panel: a panel for the circuits your battery powers in an outage, on systems that back up only part of your home.


​

What are conduit, junction boxes and trenches?

Conduit is the pipe that carries the wiring between the parts of your system. It usually runs along the outside of your home on the shortest safe route. A junction box is a small box where wires connect. Some systems, such as ground mounts, need a narrow trench so the wiring can run underground.


​

Conduit along an outside wall

Conduit along an outside wall


​

Is it safe to touch my solar equipment?

Please don't open covers on your solar equipment or change its wiring. Keep about 3 feet of open space in front of your electrical panel and equipment. If something looks damaged, or you see sparks or smell burning, stay away and call 911 for any immediate danger. Then see How do I request service for my solar system?


​

Related articles

Did this answer your question?